Preamp Tubes 12AX7/ECC83

Here we have a great selection of Vintage tubes …

**Please Note a lot of the stock has sold but we leave it here to give an indication of what we carry in stock**

k

Euro Audio Team-Eat ecc803s/12ax7 pair of new in box gold pin tubes


These ECC803 Double Triode pair of valves comes with a Cool Damper pre fitted which offers a more controlled and deeper bass, a more open and detailed sound stage, and crisper and greater dynamic range.

All EAT Cool Valve ECC803S's are required to pass through rigorous testing to meet EAT's high standards. As a result of this selective process, all ECC803S's are matched to very similar specifications.

Brimar Uk 12ax7/6057 nos/nib red print large black plate - yellow t


BRIMAR 12AX7/6057 NEW OLD STOCK/NEW IN BOX

BIG WARM REFINED SOUNDING BRITISH TUBES

RARE RED PRINT 6057 ON FRONT OF TUBE

LOW NOISE IDEAL FOR A PHONO STAGES

LONG BLACK BIG BOX RIBBED PLATES

SQUARE GETTERS

YELLOW T ON BACK OF THE TUBES.

1960 BRAND NEW IN ORIGIONAL BOX.

SAME FACTORY CODES ON 3 OF THE TUBES=1J4/997

Brimar Cv 4004/12ax7 British Military- test strong




BRITISH MILITARY BRIMAR ECC83/12AX7/CV4004 TUBES. Rare Brimar top of the audio chain. Boxed plates. Round getter. Very low noise and microphonics, tests very good with very well balanced sections.
MATCHED PAIRS AVAILABLE.

Philips Ecc83/12ax7 mint -1965 factory codes-brand new old stock !


Philips Miniwatt 12AX7/Ecc83 preamp tubes. New old stock in origional boxes. Produced in the Heerlen factory in Holland in 1965. Ribbed plates with Halo O Getters. 1965 factory codes.
brand new old stock mint tubes in origional boxs.

MULLARD 12AX7/ECC83 AUSTRALIAN MADE



12ax7/ecc83 tested high quality used as new, test strong, quality tubes. Made in the mullard australian factory with mullard tooling. They are a well made, wonderful rich warm dynamic sounding vintage valve.

SIEMENS GERMANY 12AX7/ECC83


German seimens as new ecc83/12ax7 tubes x 4 matched quad made in the 1960's in munich germany. Lovely musical sounding tubes. Double getter strong supports. The white markings are very clear on them and they feature the same factory codes. 4 x tubes available

Telefunken Ecc83- 12ax7 as new pairs excellent quality tested tubes



The most musical sounding of all the vintage valves are telefunkens made in western germany in the 1960's.

These are authentic diamond based, hi quality used, as new, tested strong, audio tubes made to last 10,000 hours. They have a fantastic dynamic range, with wonderful detail and strong bass sound. These rare vintage telefunken 12ax7/ecc83 tubes.

MULLARD 12AX7/ECC83 ORIGIONAL 1960'S U.K


British mullard origional british 1960's quality low use vintage tubes made in blackburn lancashire.rich warm dynamic sounding tubes. Test strong.






ECC83/12AX7 TUBES


We have a great selection of the ECC83/12AX7 used, as new tubes available in stock. These are all tested strong and some of them come as matched pairs in their origional boxes.

MULLARD AUSTRALIA
VALVO GERMANY
PHILIPS HOLLAND
RCA USA
POPE HOLLAND
TOSHIBA
JAPAN
TELEFUNKEN GERMANY(SOLD)
BRIMAR BRITAIN
RADIOTRON AUSTRALIA
JHS USA
CBS USA 7025
EH RUSSIA
SOVTECK RUSSIA
NATIONAL USA
DUMONT USA
WEBCOR USA
SYLVANIA USA
GE KINSMAN USA
ZAEREX HUNGARY
GE JAN USA
REALISTIC KOREA
NATIONAL YUGOSLAVIA

Follow us on Facebook

Latest Testimonials

Bloody marvelous! Before anything else, there is an excitement and respect just unwrapping something that has been living in a box for seventy odd years. They have a real clarity and detail that lets the nature of the Mullard 12AX7's in the pre-amp sing their true song; it takes that sound and faithfully reproduces and enhance it in a way that no other valves have. Brilliant! - thanks Paul.

I had a Steampunk project and needed a couple dozen valves for props. Paul was extremely friendly and helped me build up a collection of neat looking ones that will certainly add to the theme. Overall a great person and very passionate about sourcing and seeing these valves go to good use (even though it's not for an amp or radio!).
jonny427 (110 110 positive feedback) Address Verified May 2013 Fri 20 Jun 2014

Paul has helped enormously re-valve my collection of vintage valve amps. Using his test equipment, he painstakingly tested over 100 valves, grading and categorising them and was able to supply either directly or through his extensive network all those requiring replacement due to either non function or matching equivalents. I can now be reassured the valves I'm using are of the best quality and fit for purpose. I would recommend Paul assess your valve requirements and rate his knowledge highly
fazze (170 170 positive feedback) Thu 05 Jun 2014

Meet the best bloke on trade me! This guy is truly great, very knowledgeable, an absolute pleasure to deal with and as honest as the sun shines. If you really need world class TONE, then well done, you've found the doorway to a very exciting world...
rippler (155 155 positive feedback) Mon 02 Jun 2014

Paul provided outstanding service in testing my tubes for me and also sending some alternatives to try. He is very highly recommended. A+++.
kalorix (355 355 positive feedback) Address Verified Feb 2013 Sat 24 May 2014

thank you so much for fast and efficient service,product well wrapped too.
wawa16 (172 172 positive feedback) Address Verified Dec 2012 Wed 14 May 2014

Outstanding generosity toward a school project, with a donation of valves as asked. First class effort. thanks
flyboy39 (124 124 positive feedback) Thu 17 Apr 2014

Paul sent me 11 high quality valves to test in my fender twin reverb. He said he doesn't like to push people into certain valves which is great because i know my taste can be very different from others. I was impressed by the variety and quality of the valves and even more impressed by the sound when i rolled the vales through the amp. In the end i settled on 2 nice 12AX7 and 1 nice 12AT7. my amp sounds amazing now! only problem is.... i think i want to try every valve now!?!?
roddiss (11 ) Tue 08 Oct

What great service Paul sent me 4 sets of tubes to try with no obligation to buy. One of the sets of tubes he sent me absolutely transformed my system, a system which incidentally cost wise is approaching $80K. From my perspective and dealings over seas I believe Pauls prices and service are up there with the best and I really did appreciated being given the opportunity to try before buy so am I wrapped in his products and service you betcha. Barry New Plymouth Thanks Paul
sequoia22 (2179 ) Address Verified Mar 2012 Wed 18 Sep

Paul's Service is outstanding. He sent 4 valves to me in Dunedin to try in my preamp, with no obligation to buy. I found one that gave me the results I was looking for, and Paul was very careful not to influence my choice. Its hard to imagine a better way to buy valves!
stoatgobbler (18 ) Wed 11 Sep

Paul, sent me valves to test under no obligation, fast friendly service, this is the sort of guy you want to deal with in audio.Paul I dint purchase this time, but rest assured I will when ready and will continue to promote your business/service. Thanks so much, Mark
mc10 (206 ) Address Verified Mar 2012 Mon 02 Sep

My guitar amp came with some Chinese valves.I bought a 12AY7 from paul and the difference was marked. Excellent trader and I would buy from him again ,in fact i will be doing so.
ponder2 (82 ) Thu 01 Aug

Brilliant service offered by Paul. Offered me a trial on Vintage Valves amplifier. What a difference they made to the depth and richness of sound! Highly knowledgeable guy, and very professional service. Recommended!
millarco (173 ) Sun 21 Jul

A very good service - sent me a selection of valves to try and I only had to pay for the ones I kept. Excellent.

paul20 (205 ) Address Verified Sep 2012 Tue 16 Jul

Paul is an extraordinary guy to deal with. He has helped me improve my system with the right selection of valves, he is always assertive and knowledgeable and this of course has improved my listening experience; my music will never be the same thanks to Paul. As he recommends, rolling the valves of your gear will lead to a new way of enjoying music. Cheers!
dana07 (51 ) Sun 26 May

all I can say about Paul is wow! he is a top bloke that totally knows his stuff regarding all NOS valves in the world and he has it all. Cant say I have met someone like him before, he puts TRUST in people by sending them valves to try to get a feel on what these valves can do and I am very impressed! He help me find the right valve tube (Amperex 6DJ8 / Bugle Boy) for my Aune T1 DAC and it has made my DAC a top notch device. Thanks again Paul, will find you again for 12AX7's soon!
cancer23 (402 ) Address Verified Feb 2012 Sun 26 May

I am very impressed with the service that Paul provided. He found an electric eye valve for my old Pye radio. He sent them down for me to try, on trust, he has old fashioned values. If anyone is looking for old valves go to Paul first.
pac11 (194 ) Address Verified Oct 2012 Mon 20 May

to all those traders out there, remember the days when trademe first started when you could trust most traders (kiwi's) to be honest, but not so much these days unfortuately, but this guy is still one of those guys you can trust 100%,sent me down 8 mullards nos valves, to tube roll,with no payment made to him &rolled them in my amp as he desribed them they were a beauitful sound,he's got just about every tube you can think of,or will find it for you,if he can,even from Russia,amazingly helpful.
ry5 (697 ) Address Verified Nov 2012 Tue 19 Feb

Paul is a great person to deal with. A Futura radio being restored needed a 6A7 valve, but was very difficult to find. Luckily I came across Paul's advertisement on Trademe and inquired. To my delight, he had new (unused) valve still in the original carton. He sent it securely to me by post, and the radio is happily singing now! Thanks Paul. Highly appreciate your service to the vintage radio enthusiasts. Sarath
electro22 (13 ) Address Verified Jan 2013 Wed 19 Dec

Paul has been a great help in finding the right values for my ears/system i have now had 5 pairs and what different a good valve makes Thanks Paul
luckyr (85 ) Thu 22 Nov

Paul supplied me with a quad of beautiful Vintage Mullard xf2's to try in my Yaqin amp. They are the most amazing tube I have used so far, it's safe to say they are staying put in the amp. Thanks Paul.
agilroy4g (301 ) Address Verified Sep 2012 Tue 20 Nov

Thankyou Paul great service with exceptional communication throughout the process . I will recommend with confidence to any one searching for tubes to enhance and breath new life into the old school amplifiers as well as up grades as was the case with my spark amp , all the best regards Clive Riley.
cjriley (32 ) Address Verified Apr 2013 Thu 15 Nov

I am a harmonica player and the problem with using guitar amps for harp is that guitars need hi gain valves in the pre amp section...not good for harp as it means you get feedback at very low volume settings on the amp, Pete sent me a selection of quality vintage low gain valves which I tried and swapped around till my amps gain was at the desired level, I can now drive my amp at a good working feedback free level. Pete's excellent service allowed me to get a harp friendly amp real easily..!!
mike581 (236 ) Address Verified Aug 2013 Fri 09 Nov

again paul has blown me away with a premium selection of vintage gold pin tubes to try in my cd player . e88cc
aimo5 (48 ) Thu 01 Nov

Vintage Audio Valves